Tuesday, December 10, 2013

Ready for concrete..

There's so many details to look after before the basement walls are poured. The guys have put the rest of the floor frame in place and the big beams to define the stairwell, and have carefully straightened and braced the wall forms plumb and level. Everything that has to be bolted into or passed through the concrete has to be planned for at this point.There are vent pipes for the air exchanger and future heat pump, conduits for outside electrical, outside water tap, and anything to be bolted on later needs its bolts in place now. Above, the guys are lining up the roof parts for over the basement door in order to mark the spots on the foam where the L bolts will go through into the concrete. These are the roof supports I was building in the workshop back near the beginning of this blog.
Because the grade level will be just under the front basement windows we will need retaining walls to contain the gravel and dirt away from the door. I'm recycling some of the pressure treated decking and 2x8's taken off the old cottage, into low walls for this purpose.
Ryn is always there to offer encouragement and to be in the way...


Post a Comment